Maeda Koki MKCTV type OIL SIGNAL

MKCTV type OIL SIGNAL

[ Flow rate can be seen with the naked eye ] because you are using a transparent tapered tube, with a display red line ball (or float) 　 it is possible to check the approximate flow rate by looking at the relationship between position. [ Flow rate with adjustable valve ] to adjust the miniature valve, ball (or float) to the position of the display red lines 　 can be set the required flow rate of by keying. [ With protective cover ] by the metal protective cover, and reduce the possibility of damage due to impact or the like from the outside. [ Mounting orientation does not matter ] attitude of when mounting because it uses a spring inside the upward and downward and　 can be done sideways, etc. freely.
　

　

　

　

Model List

Model		Dimensions (mm)				The maximum flow rate (L / min)
Model		Connection	full length	Full width	Depth	The maximum flow rate (L / min)
Root same included seen form	MKCTV20-1TL	Rc1 / 8	115	Thirty	51	Three
	MKCTV20-2TL	Rc1 / 4	115	Thirty	51	Three
	MKCTV20-3TL	Rc3 / 8	122	Thirty	51	Four
Copper tube for	MKCTV20-4	φ4	129	Thirty	51	1.5
	MKCTV20-6	φ6	131	Thirty	51	Three
	MKCTV20-8	φ8	134	Thirty	51	Three
	MKCTV20-10	φ10	142	Thirty	51	Four

When ordering, quote □ Please specify the inside of.　

Model
MKCTV □□ - □ TL

Oil of type □
(or the viscosity of the oil □ CSt)

Regular flow rate
□ L / Min

Example: MKCTV20-2TL oil types ISOVG32 regular flow 3L / Min ※ is the type of case of connection R male thread will be MKCTV20- □ TOL. Example: MKCTV20-3TOL standard specification (screw-type)

fluid		oil
Connection (outlet side)		Rc female thread	Changes to the R male thread is also available. Connection of the valve is the only R male thread.
Heatproof temperature		Maximum 80 ℃	-
Breakdown		1MPa	-
Material	Transparent tapered tube	acrylic	-
	Fittings	C3604 (brass)	-
	Protective cover	BC (gunmetal)	-
	spring	SUS304	-
	Nylon ball	Nylon 66	You may need to use a cylindrical float.
	Miniature valve	BC	Production in the lock nut with a valve is also possible.
	O-ring	Nitrile rubber	-

Standard specification (for copper tube)

fluid		oil
Connection		See above	-
Heatproof temperature		Maximum 80 ℃	-
Breakdown		1MPa	-
Material	Transparent tapered tube	acrylic	-
	Fittings	C3604 (brass)	-
	Hexagon cap nut	C3604 (brass)	-
	Chuck sleeve	Cu	-
	Protective cover	BC (gunmetal)	-
	spring	SUS304	-
	Nylon ball	Nylon 66	You may need to use a cylindrical float.
	Miniature valve	BC (gunmetal)	Production in the lock nut with a valve is also possible.
	O-ring	Nitrile rubber	-

Contact Contact Us

Maeda Koki MKCTV type OIL SIGNAL

About